01.2025 subject to alterations Description: The control unit is the electrical module for controlling the transporter. Material: Steel IP54 Technical data: Temperature operating range: -20 to +40 °Celsius (environment temperature) Note: The control unit must be mounted on a metal surface for heat dissipation. Before connecting the electric transporter, check that the channel can move freely in the direction of travel. Included in the delivery, Mains connection incl. plugs for USA and GB Fixing bolts ISO 7380-1 M6 x 8 (x2) TRANSPORTER ELECTRICAL - ACCESSORIES CONTROL UNIT BLACK LINE EX, SIGNAL CABLE, CONNECTION CABLE 1 - Changeover between PLC and manual operation PLC mode: In this position, this start/stop function is controlled via the straight signal cable (M12 plug). Manual mode: In this position, the start/stop function is controlled by the control unit. 2 - 2299.60.81.01. S ignal cable straight, to the press order separately Order No l [m] 2299.60.81.01.03 3 2299.60.81.01.05 5 2299.60.81.01.10 10 For further information, see catalogue page for straight signal cable 3 - 2299.62.82.01. C onnection cable straight/straight, control unit - transporter order separately Order No l [m] 2299.62.82.01.03 3 2299.62.82.01.05 5 1-phase 110-230 V, 50-60 Hz, earthed connection *.13 = potential free output Order No* Connection [V] Power requirement [A] 2299.62.14100.13 230 0,75 - 1,7 2299.62.12100.13 230 1,2 - 2,2 2299.62.10100.13 230 1,8 - 3,5 2299.62. Control unit BLACK LINE EX 1 2 3 2299.62.1 100.12/13 142 56 270 242 257 ø6,5 2 230 V
RkJQdWJsaXNoZXIy MTIwNzY0