03.2025 2 2 1 9 . 3 7 G 4 . 0 7 2 0 P = ø 7,2 mm = 0720 19 mm = (4) 100 mm = (G) 13 mm = (7) HSS = (3) = (9) = (1) = 22 subject to alterations l 71 80 100 120 d1 / Order No d2 P l1 / Order No k (Order Code character) (D) (E) (G) (J) 3 / (1) 4.5 0,8 - 2,9 8 (1) 10 (2) 0.5 ● ● ● ● 4 / (2) 5.5 1 - 3,9 8 (1) 13 (3) 0.5 ● ● ● ● 5 / (3) 6.5 1,5 - 4,9 13 (3) 19 (4) 0.5 ● ● ● ● 6 / (4) 8 1,6 - 5,9 13 (3) 19 (4) 0.5 ● ● ● ● 8 / (5) 10 2,5 - 7,9 19 (4) 25 (5) 1 ● ● ● ● 10 / (6) 12 4 - 9,9 19 (4) 25 (5) 1 ● ● ● ● 13 / (7) 15 5 - 12,9 19 (4) 25 (5) 1 ● ● ● ● 16 / (8) 18 8 - 15,9 19 (4) 25 (5) 1.5 ● ● ● ● 20 / (9) 22 12 - 19,9 19 (4) 25 (5) 1.5 ● ● ● ● 2219. Punch, stepped, round, ~DIN 9861 PUNCH, STEPPED, ROUND, ~DIN 9861 Material: HSS Order No 2219.3□□□. ASP 2023 Order No 2219.6□□□. Hardness: Shaft 64 ± 2 HRC Head 52 ± 5 HRC Description of FIBRO materials for tool and die components see at the beginning of Chapter E. Execution: Stamp shank and punch head are precision ground after the heat compression and tempering of the punch head using the plunge process. Note: *P= Tolerance is different from the DIN standard (h6 tolerance according to DIN 9861) 2219. -0,1 d 60° R13 l +0,5 +0,5 l 1 2 h6 d1 k+0,2 *P-0,01 radiussed Ordering Code (example): Shape: round Order No Punch cutting length l1 Order No Length: l Order Code character Diameter: d1 Order No Material: Order No Type: Order No DIN 9861 Execution: Order No round Punch: without ejector pin
RkJQdWJsaXNoZXIy MTIwNzY0