03.2024 2 2 2 9 . 3 9 E 5 . 1 5 5 0 . B 90 ø = (B) P = 15,5 mm = 1550 25mm = (5) 80 mm = (E) 20 mm = (9) HSS = (3) = (9) = (2) = 22 ±0,01 P ±0,01 P G G = 2 × P subject to alterations l 71 80 100 120 d1 / Order No d2 Pmin Gmax l1 / Order No k (Order Code character) (D) (E) (G) (J) 3 / (1) 4.5 0.5 2.9 8 (1) 10 (2) 0.5 ● ● ● ● 4 / (2) 5.5 0.8 3.9 8 (1) 13 (3) 0.5 ● ● ● ● 5 / (3) 6.5 1 4.9 13 (3) 19 (4) 0.5 ● ● ● ● 6 / (4) 8 1.6 5.9 13 (3) 19 (4) 0.5 ● ● ● ● 8 / (5) 10 2 7.9 19 (4) 25 (5) 1 ● ● ● ● 10 / (6) 12 3.5 9.9 19 (4) 25 (5) 1 ● ● ● ● 13 / (7) 15 4.5 12.9 19 (4) 25 (5) 1 ● ● ● ● 16 / (8) 18 6 15.9 19 (4) 25 (5) 1.5 ● ● ● ● 20 / (9) 22 8 19.9 19 (4) 25 (5) 1.5 ● ● ● ● 2229. Punch, stepped, square, ~ DIN 9861 PUNCH, STEPPED, SQUARE, ~ DIN 9861 Material: HSS Order No 2229.3□□□. ASP 2023 Order No 2229.6□□□. Hardness: Shaft 64 ± 2 HRC Head 52 ± 5 HRC Description of FIBRO materials for tool and die components see at the beginning of Chapter E. Execution: Punch head heat compressed. Contact area, shaft and cutting form precision ground. The locating flat is designed parallel with the dimension P = 0°. Note: With kerf ≤ 0.04 mm, FIBRO rounds off sharp edges, if the punch and bush are ordered together. This reduces the fitting time and the risk of an edge break during operation. 180° 2229. -0,1 d 60° R13 l +0,5 +0,5 l 1 2 h6 d1 k+0,2 90° 0° 270° radiussed Ordering Code (example): Angle: Order Code character Shape: square, Length P Punch cutting length: l1 Order No Length: l Order Code character Diameter: d1 Order No Material: Order No Type: Order No DIN 9861 Execution: Order No square Punch: without ejector pin
RkJQdWJsaXNoZXIy MTIwNzY0