Material: HSS Order No 2259.3□□□. ASP 2023 Order No 2259.6□□□. Hardness: Shaft 64 ± 2 HRC Head 52 ± 5 HRC Description of FIBRO materials for tool and die components see at the beginning of Chapter E. Execution: Punch head heat compressed. Contact area, shaft and cutting form precision ground. The locating flat is designed parallel with the dimension P = 0°. Note: With kerf ≤ 0.04 mm, FIBRO rounds off sharp edges, if the punch and bush are ordered together. This reduces the fitting time and the risk of an edge break during operation. 03.2024 Ordering Code (example): 2 2 5 9 . 3 9 G 4 . 1 2 1 5 . 1 1 5 0 . B Angle: 90° Order Code character = (B) W = 11,5 mm = 1150 = 1215 Order No = (4) Order Code character = (G) Order No = (9) Order No = (3) O rd e r No = (9) Order No = (5) = 22 G ±0,01 R 0,5 P±0,01 W±0,01 * G = (P−1.0)2 +(W−1.0)2 +1 subject to alterations 71 80 100 120 d1 / Order No d2 Wmin Gmax l1 / Order No K l (Order Code character) (D) (E) (G) (J) 3 / (1) 4.5 1.1 2.9 8 (1) 10 (2) 0.5 ● ● ● ● 4 / (2) 5.5 1.1 3.9 8 (1) 13 (3) 0.5 ● ● ● ● 5 / (3) 6.5 1.1 4.9 13 (3) 19 (4) 0.5 ● ● ● ● 6 / (4) 8 1.6 5.9 13 (3) 19 (4) 0.5 ● ● ● ● 8 / (5) 10 2 7.9 19 (4) 25 (5) 1 ● ● ● ● 10 / (6) 12 3.5 9.9 19 (4) 25 (5) 1 ● ● ● ● 13 / (7) 15 4.5 12.9 19 (4) 25 (5) 1 ● ● ● ● 16 / (8) 18 6 15.9 19 (4) 25 (5) 1.5 ● ● ● ● 20 / (9) 22 8 19.9 19 (4) 25 (5) 1.5 ● ● ● ● 2259. Punch, stepped, rectangle with radiused corners, ~DIN 9861 PUNCH, STEPPED, RECTANGLE WITH RADIUSED CORNERS, ~DIN 9861 Shape: rectangle with radiused corners, Width W Shape: rectangle with radiused corners, Length P P = 12,15 mm Punch cutting length l1 19 mm Length: l 100 mm Diameter: d1 20 mm Material: HSS Type: D IN 9861 Execution: rectangle with radiused corners Punch: without ejector pin -0,1 d 60° R13 l +0,5 l +0,5 1 2 d1 h6 k+0,2 2259. 180° 90° 0° 270° radiussed
RkJQdWJsaXNoZXIy MTIwNzY0